Skip to content
Free shipping on orders over $75
New arrivals every week
Easy 7 day returns
Search
Country/region
USD
Recently viewed Wishlist Your cart
Menu
Country/region
الولايات المتحدة (USD $)

Ring Size Calculator

Find and convert your ring size online in under a minute, with no ring sizer to order. Measure a ring you own right on the screen, type in a finger measurement, or print a ruler, then convert instantly between US, UK and EU sizes.

Ring Size Calculator
Step 1 of 2·Calibrate your screen

Step 1. Calibrate your screen. Rest any bank or ID card against the screen (on a phone, lay the phone flat on a table and set the card on top). Drag the dashed outline until it is exactly the size of the card, then take the card away. Nothing is drawn or written in this step. Every card in the world is the same standard size, so matching it teaches the tool your screen's true scale and makes the circle in step 2 millimeter accurate.

Bank / ID card
Step 2 of 2·Match your ring

Step 2. Match your ring. Place a ring that fits on top of the circle, then drag the circle itself (or the slider below) until it sits just inside the band.

Line the circle up with the inside of your ring to read the size.

Enter your measurement to see your size in US, UK and EU.

Enter your measurement to see your size in US, UK and EU.

Print a ring size ruler

No ruler at home? Print this at 100% / "Actual size" (not "fit to page"). Wrap a strip of paper around the base of your finger, mark where it overlaps, then lay the marked strip along the scale below and read your size at the mark.

Fashorio ring size ruler (print at 100% scale)

Sized for print, so it looks small on screen. Printed at 100%, each millimeter is true to size.

How to measure your ring size

There are two ways. If you own a ring that already fits the right finger, use the on screen tool at the top of this page. If you have no ring, measure your finger with a paper strip.

Method 1: You have a ring (on screen tool)

  1. Grab any bank, debit or ID card. Every card in the world is the same standard size, 85.6mm wide. The tool asks for it only to learn your screen's true scale, because every screen shows millimeters differently. Nothing is drawn or written on anything in this method.
  2. Match the dashed outline to the card. In the Measure with a ring tab above, rest the card against the screen (on a phone, lay the phone flat on a table and set the card on top). Drag until the dashed outline is exactly the size of the card, then take the card away. The screen is now calibrated.
  3. Place your ring on the screen and match the circle. Lay the ring flat on the screen and drag until the circle exactly fills the inside edge of the ring. Your US, UK and EU sizes appear instantly.

Method 2: No ring (paper strip)

You need: A strip of paper A pen A ruler (or our printed one)
  1. Cut a thin strip of paper. About 10cm long and roughly as wide as a ring band (5 to 7mm). Paper beats string: string stretches while you wrap it and steals a size.
  2. Wrap it where a ring would sit. Around the lowest part of the finger, where the finger meets the hand. Snug against the skin but never squeezing. If your knuckle is clearly wider, wrap the knuckle too, and choose a size between the two readings so the ring can pass over it.
  3. Mark where the end overlaps. Hold the wrap still and draw one small pen line on the strip exactly where its end meets the layer underneath.
  4. Measure the strip flat, in millimeters. Unwrap it, lay it flat, and measure from the end of the strip to your pen mark. That number is your finger circumference. No ruler at home? Use the Print a ruler tab above: lay the strip at 0 and your US size is printed right above the mark.
  5. Enter the number in the calculator. Type it into the Finger circumference tab above for your US, UK and EU sizes. Landed between two sizes? Take the larger one.

Accuracy tips: measure at the end of the day when fingers are largest, avoid measuring cold hands (fingers shrink), and wrap two or three times, keeping the largest consistent reading.

Ring size chart: US, UK and EU conversion

US size UK size EU size Diameter (mm) Circumference (mm)
3F4414.144.3
3.5G45.514.545.6
44714.946.8
4.54815.348.1
54915.749.3
5.550.516.150.6
65216.551.8
6.55316.953.1
754.517.354.3
7.555.517.755.6
85718.156.9
8.55818.558.1
959.518.959.4
9.56119.460.9
106219.862.2
10.563.520.263.5
1164.520.664.7
11.56621.066.0
126721.467.2
12.5Z68.521.868.5
13Z+169.522.269.7

Found your size?

Browse our moissanite and sterling silver jewelry: rings, necklaces and earrings with everyday sparkle.

Ring sizing FAQs

How do I measure my ring size at home?

Wrap a thin strip of paper or a piece of string snugly around the base of your finger, mark where it overlaps, and measure that length in millimeters with a ruler. That length is your finger circumference. Enter it in the calculator above to get your US, UK and EU sizes.

How do I find my ring size online?

Use the tool at the top of this page. Calibrate your screen once with any bank or ID card, then either size a ring you already own directly on the screen or type in a finger measurement. It reads your size and converts it to US, UK and EU instantly, with nothing to order or wait for.

How do I convert a US ring size to a UK or EU size?

Every row of the ring size chart on this page lines up the same finger across all three systems, so you can read straight across from a US number to its UK letter and its EU (millimeter) size. The calculator does the same conversion automatically once you enter a measurement.

Can I measure my ring size without a ring sizer?

Yes, you need no special sizer. Either measure a ring that already fits using the on screen tool, or wrap a thin strip of paper around your finger, mark the overlap, and measure it in millimeters with a ruler. You can print the ruler on this page if you do not have one.

What time of day should I measure my finger?

At the end of the day, when your fingers are at their largest. Fingers are smaller in the morning and in cold weather, so an evening measurement at normal room temperature gives the most reliable fit.

What if I'm between two ring sizes?

Choose the larger size. A slightly loose ring can be worn comfortably (or resized down more easily), while a tight ring can be uncomfortable and hard to remove.

Can I measure using a ring I already own?

Yes. Measure the inside diameter of a ring that fits the intended finger, straight across the widest inner point, in millimeters. Switch the calculator to "ring diameter" mode and enter that number.

Do wide bands fit differently?

Wide bands (6mm+) fit more snugly than thin ones. If you're buying a wide band and measure between sizes, go up a half size for comfort.

Are US, UK and EU ring sizes different?

Yes. US sizes use numbers (3 to 13), UK sizes use letters (F to Z), and EU/ISO sizes are the finger circumference in millimeters. The calculator and chart on this page convert between all three.

How does the "measure on screen" tool work?

First you calibrate the screen by matching an on-screen outline to any bank or ID card (every card is the same standard size, 85.6mm wide). Once calibrated, place a ring that fits on top of the circle and resize it until the circle sits just inside the band. The tool reads the inner diameter and gives your US, UK and EU size. Your calibration is saved for next time.

More free tools

All tools →

Your cart

Your cart is empty

Once you add something, it will show up here.

Continue shopping

You might like

Loading

Notify me

Sign up and we will notify you when this is available.

You will also join our email list for restock and new-arrival updates. Unsubscribe anytime.